Rapido T Installation
9 easy steps to install universal concealed valves GROHE Rapido.
1. Mount the pipe couplings
2. Line out the concealed valve - Mark drill holes - Drill the holes and mount the box
3. Connect the pipes and isolate them - Check the connections - Flush the pipes
4. Fill the space in the wall - Use the marker for the correct installation depth
5. Cover the wall with tile adhesive - Place the collar and cover it also with tile adhesive
6. Fit the tiles on the wall
7. Remove the cap - Cut the shaft off
8. Mount the Aqua Dimmer head part
9. Mount the trim set