You can find the hand shower’s flow rate in the flow rate diagram for the relevant product.

Our shower rails cannot be shortened. However, we offer shower rails in the Euphoria and Rainshower SmartActive series that are flexible and can be adjusted to existing drill holes.

Unfortunately, we do not offer any appropriate products in the Tempesta series. You would have to switch to the Euphoria or Rainshower series instead.

The upper bracket of Vitalio shower rails is flexible and can be adjusted to fit existing drill holes.

The upper bracket of Euphoria shower rails is flexible and can be adjusted to fit existing drill holes.

The upper and lower brackets for Rainshower shower rails are flexible and can be adjusted to existing drill holes.

The drill holes should be spaced at 620 mm (for the 600 shower rail) or 920 mm (for the 900 shower rail).

The distance between drill holes is between 470 and 620 mm. The upper shower rail bracket is flexible and can be adjusted to existing drill holes or joint dimensions.

The distance between drill holes is between 470 and 620 mm (for the 600 shower rail) or 770 and 920 mm (for the 900 shower rail). The upper shower rail bracket is flexible and can be adjusted to existing drill holes or joint dimensions.

The distance between drill holes can be between 570 and 630 mm (for the 600 rail) and 870 mm and 930 mm (for the 900 rail). Both shower rail brackets are flexible and can be adjusted to existing drill holes or joint dimensions.

Drill holes for the fixed bracket should be spaced at 23 mm apart horizontally. In sets with adjustable wall shower brackets, the distance between drill holes is 22 mm vertically.

Drill holes for the fixed bracket should be spaced at 23 mm apart horizontally. In sets with adjustable wall shower brackets, the distance between drill holes is 22 mm vertically.

Drill holes should be spaced at 18 mm apart horizontally.

Drill holes should be spaced at 18 mm apart horizontally for sets including a fixed bracket. In sets with adjustable wall shower brackets, the distance between drill holes is 25 mm.

The shower rail itself is made of metal. The shower rail holder and the slider are made from ABS.

The shower rail itself is made of metal. The shower rail holder and the slider are made from ABS.

The shower rail itself is made of metal. The shower rail holder and the slider are made from ABS.

The shower rail itself and the shower rail holder are made of metal. The slider is made from ABS.

There is a screw handle on the slider. Loosen this to adjust the height. To adjust the angle of inclination, hang the hand shower with the conical screw connection from the shower hose in the holder. Move the hand shower down and forwards, or up and back, depending upon the direction in which you wish to adjust the angle. Continuous angle adjustment is possible.

Please check whether the shower hose has been installed correctly. The conical screw connection must point to the hand shower. This is hooked into the holder. The conical shape makes this sit in the bracket in a stable position.

Yes, that is possible.

In this case, you can use soap dish 27206000 or rack 27596000.

In this case, you can use soap dish 27206000 or rack 27596000.

In this case, you can use soap dish 27206000 or rack 27596000.

An outlet is already included with the shower rail or the shower rail fittings.

Most hand showers are made from plastic, regardless of their manufacturer. Metal hand showers are very heavy. If the hand shower were to fall out of your hand accidentally, damage to your shower tray, tiles or shower screen would be inevitable. We offer two metal rod hand showers: the Euphoria Cube+ and the Sena.

We recommend cleaning the hand shower using our GrohClean cleaning agent. Limescale should also be regularly removed from SpeedClean nodules on the hand shower’s spray plate. You can do this simply by wiping them with your fingers.

Please hang the hand shower with the conical screw connection from the shower hose in the holder. Move the hand shower down and forwards, or up and back, depending upon the direction in which you wish to adjust the angle. Continuous angle adjustment is possible.

We offer a 45° angle bracket which is screwed between the hand shower and hose. This brass angle bracket can be purchased with item no. 28389000.

We supply the adjustable wall shower bracket 28623000 (round design) and 27055000 (round and angular design).

Ideally you should get in touch with your tiling specialist to find out the specific sealant to use in line with DIN standards.

This is the distance from the bottom of your cold water tank to where your appliance is i.e. shower

Hard water is water that has a high concentration of dissolved minerals i.e calcuim and this can cause the pipe work to fur up and can lead to blockages in our products.

Yes, GROHE products are life tested at our plant in the Black Forest in Germany, which has the hardest water in Europe. We still recommend general maintenace is carried out annually to ensure the performance of your product is maintained e.g. clean accessible filters.

There are two ways to reduce the amount of limscale forming. You can fit a water softerner or a water conditioner.

Historically, the most common installation in the UK and is identified by the use of a cold storage tank normally in the loft space. Some taps may have gravity fed hot and mains cold, which is common in the kitchen.

This is a gravity system with the addition of a booster pump to increase flow and pressure to taps, baths and showers. The larger the pump the greater the flow rate.

The Relexaflex shower hose is rather greyish compared to the actual hose. Both screw connections are fixed. The Rotaflex shower hose is identical in terms of colour. The conical screw connection can be rotated and provides anti-twist protection. The Silverflex shower hose is similar to the Rotaflex except the colour of the hose is silver.

The screw cone offers anti-twist protection for the shower hose.

The required length of the shower hose depends on where it is being used, the height of the user and the specifications of the location. Nowadays, shower hoses in showers are often 1.75 m long. In the bathtub, if this is primarily used for baths, a 1.25 m shower hose is usually used.

For this purpose, we offer a 90° angle bracket which is screwed to the tap’s shower connection nipple. This metal bracket can be purchased with item no. 45304000.

Please fill the shower hose with water and leave it hanging in the shower or bath. The shower hose will get into shape itself after just a few days.

Shower pipes cannot be shortened. However, we offer shorter and longer shower pipes as special accessories for most hose shower systems.

We offer a thermostatic cartridge as a special accessory for connections that are the wrong way round to solve this problem. This replaces the existing thermostatic cartridge. The required thermostatic cartridge for connections that are the wrong way round can be obtained with item no. 47175000.

The hot and cold water connections of your house connections are the wrong way round. Hot water should be left and cold water should be right. We offer a thermostatic cartridge as a special accessory to solve this problem. This replaces the existing thermostatic cartridge. The required thermostatic cartridge for connections that are the wrong way round can be obtained with item no. 47175000.

We offer shorter and longer shower pipes as special accessories for most shower systems. Shower systems with diverters are also available from the series Rainshower (item no. 27058000), Euphoria (item no. 27421002) and Euphoria Cube (item no. 27696000), which are installed alongside the tap. The shower system is connected to the tap by a shower hose.

Use with flow heaters is possible. They must have a minimum performance of 18 kW.

In this case, you usually need to change the settings on your flow heater. This has “problems” with the water volume in your shower system. Changing the flow settings in your flow heater will remedy the issue.

We also offer bathtub shower systems in the series Rainshower SmartActive (item no. 26657000), Euphoria (item no. 27475002), Euphoria SmartControl (item no. 26510000) and Tempesta (item no. 26223001). Alternatively, shower systems with diverters are also available from the series Rainshower (item no. 27058000), Euphoria (item no. 27421002) and Euphoria Cube (item no. 27696000) which are installed alongside the tap. The shower system is connected to the tap by a shower hose.