WC installation system and bidet faucet
Product recommendations
Installation information
The installation height of the WC-Seat should be 40 cm.
Water quantities
Operation of the bidet fitting with low-pressure displacement water heaters is not possible for the bidet fitting!
Requirements to ensure good functioning of this shower solution:
- Min. 0.5 bar flow pressure
- recommended flow pressure 1-5 bar
- Max. 10 bar operating pressure
- Test pressure 16 bar
If static pressure is greater than 5 bar, fit pressure reducer.
Avoid major pressure differences between cold and hot water supply.
- Flow rate at 3 bar flow pressure: approx. 10 l/min
- Hot water inlet max. 80°C
- Recommended: (energy saving) 60°C
General tips for installation
Please make sure that the water volume and the water pressure is adequate so as the waste is sufficiently be dimensioned.